Home › B.Tech Civil › civilengineering › Testing of Concrete › Flexure beam tests use four-point loading. For t…
Flexure beam tests use four-point loading. For the larger 150 × 150 × 750 mm beam, what is the prescribed rate of central load increase?
Answer & Solution
Correct answer: C.
1. The standard prescribes an extreme fibre stress increase of about 7 kg/cm² per minute.
2. Converting to central load on the larger beam gives 400 kg per minute.
3. For the smaller 100 × 100 × 500 mm beam the equivalent rate is 180 kg per minute.
4. The load is applied without shock and continued until the beam fails.
5. The other rates are not specified.
_Source: IGNOU ET-522 Concrete Technology, Block 2 Unit 9 "Testing of Concrete"._
Related questions
Compared with the direct tensile strength of the same concrete, the modulus of rupture obtIn the resonant frequency method, the dynamic modulus of elasticity of a concrete specimenCracks and voids inside concrete affect ultrasonic pulse velocity only when their plane isUsing the Leslie–Cheesman classification (Table 9.1), a pulse velocity reading of 3800 m/sThe portable instrument used for measuring ultrasonic pulse velocity through concrete withTo get a representative rebound number from a Schmidt hammer on a concrete area, the unit The rebound hammer commonly used in non-destructive testing of concrete was developed in 1A core has been cut with a length-to-diameter ratio of 0.85 from a slab. As per the unit,