Home › B.Tech Civil › civilengineering › Testing of Concrete › Using the Leslie–Cheesman classification (Table …
Using the Leslie–Cheesman classification (Table 9.1), a pulse velocity reading of 3800 m/s through concrete corresponds to which general condition?
Answer & Solution
Correct answer: B.
1. The table places pulse velocity of 4575 m/s and above as Excellent.
2. A pulse velocity between 3660 and 4575 m/s is rated Good.
3. 3050 to 3660 m/s falls under Questionable.
4. 2135 to 3050 m/s is Poor, and below 2135 m/s is Very Poor.
5. A reading of 3800 m/s sits within the Good band.
_Source: IGNOU ET-522 Concrete Technology, Block 2 Unit 9 "Testing of Concrete"._
Related questions
Compared with the direct tensile strength of the same concrete, the modulus of rupture obtIn the resonant frequency method, the dynamic modulus of elasticity of a concrete specimenCracks and voids inside concrete affect ultrasonic pulse velocity only when their plane isThe portable instrument used for measuring ultrasonic pulse velocity through concrete withTo get a representative rebound number from a Schmidt hammer on a concrete area, the unit The rebound hammer commonly used in non-destructive testing of concrete was developed in 1A core has been cut with a length-to-diameter ratio of 0.85 from a slab. As per the unit, For a test core cut from a structure, the cube-equivalent strength is estimated as cube st