Home › B.Tech Civil › civilengineering › Testing of Concrete › For a concrete with cube strength of 30 N/mm², t…
For a concrete with cube strength of 30 N/mm², the ratio of cylinder strength to cube strength is reported as:
Answer & Solution
Correct answer: B.
1. The cylinder/cube ratio rises with concrete strength.
2. At 15 N/mm² cube strength the ratio is about 0.76.
3. At 30 N/mm² cube strength the ratio reaches 0.91.
4. Within the normal working range the average ratio used is 0.80.
5. A ratio of 1.00 would imply identical cube and cylinder strengths, which is not observed.
_Source: IGNOU ET-522 Concrete Technology, Block 2 Unit 9 "Testing of Concrete"._
Related questions
Compared with the direct tensile strength of the same concrete, the modulus of rupture obtIn the resonant frequency method, the dynamic modulus of elasticity of a concrete specimenCracks and voids inside concrete affect ultrasonic pulse velocity only when their plane isUsing the Leslie–Cheesman classification (Table 9.1), a pulse velocity reading of 3800 m/sThe portable instrument used for measuring ultrasonic pulse velocity through concrete withTo get a representative rebound number from a Schmidt hammer on a concrete area, the unit The rebound hammer commonly used in non-destructive testing of concrete was developed in 1A core has been cut with a length-to-diameter ratio of 0.85 from a slab. As per the unit,